Semi-Structural Facade

 

Characteristics

Facade system in which profiles are used to manufacture the sheets, with a flap that fixes the glass, avoiding the use of structural silicone.

The section of the outer view of this system is 12 mm or 21 mm.

The section of uprights and crossbeams is 65 mm, visible only from the inside. Both profiles feature drainage and ventilation channels which together with the EPDM joint system ensure maximum watertightness and permeability. Possibility of profiles with thermal break.

 

Opportunities for opening

Projected opening made by means of stainless steel bars with a resistance up to 180 kg, As much the fixed as the projecting leaves are manufactured with the same perimeter profile, thus making its distinction from the outside imperceptible.

 

 

 

Inverted Wall Facade

 

Characteristics

In this system the placement of glasses takes place through a back cover that secures the glass to the supporting structure. On this profile an outer shell is placed, horizontally and vertically, thus forming an exterior view in the two dimensions. The section visible on the inside and outside of the uprights and crosspieces is 65 mm. Both profiles feature drainage and ventilation channels which together with the EPDM joints ensure maximum sealing and permeability.

 

Opportunities for opening

This type of facade, unlike any other, allows any type of opening provided by the Anicolor Systems. The window is fixed to the structure with the help of the pressing profile that secures the glass to the facade. There is also the possibility of realizing projecting openings "hidden", that is, not visible from the outside